Extrusion Blow Moulding | EBM | HL SERIES
UP TO 15L
The HL series Extrusion Blow Moulding machines stand out for the Mould- Carriage stroke on horizontal prismatic guides and the “UP & DOWN” movement of the extruder by electric motor (“Bobbing”).
According to their design, these systems are particularly suitable for both very high production (multi cavity), as well as the implementation of containers of up to 15 litres in volume.
HL500/S
Single station machine.
Carriage Stroke 490 mm.
Mould Clamping force: 14 tons
FIT to make multi-cavity bottles for the Cleaning, Chemical and Industrial sector, with volumes ranging from 1L to 5L.
HL500/L
Single station machine
Carriage Stroke 550 mm.
Mould Clamping force: 14 tons
FIT to make multi-cavity bottles for the Cleaning, Chemical and Industrial sector, with volumes ranging from 1L to 5L.
HL500/D
Double station machine
Carriage Stroke 490 mm.
Mould Clamping force: 14 tons
FIT to make multi-cavity bottles for the Cleaning, Chemical and Industrial sector, with volumes ranging from 1L to 5L.
HL600/S
Single station machine
Carriage Stroke 620 mm.
Mould Clamping force: 20 tons
FIT to make multi-cavity bottles for the Cleaning, Chemical and Industrial sector, with volumes ranging from 1L to 15L.
HL600/L
Single station machine
Carriage Stroke 700 mm.
Mould Clamping force: 20 tons
FIT to make multi-cavity bottles for the Cleaning, Chemical and Industrial sector, with volumes ranging from 1L to 15L
HL600/D
Double station machine
Carriage Stroke 620 mm.
Mould Clamping force: 20 tons
FIT to make multi-cavity bottles for the Cleaning, Chemical and Industrial sector, with volumes ranging from 1L to 15L.